Ntp-keygen User’s Manual

This document describes the use of the NTP Project’s ntp-keygen program, that generates cryptographic data files used by the NTPv4 authentication and identity schemes. It can generate message digest keys used in symmetric key cryptography and, if the OpenSSL software library has been installed, it can generate host keys, sign keys, certificates, and identity keys and parameters used by the Autokey public key cryptography. The message digest keys file is generated in a format compatible with NTPv3. All other files are in PEM-encoded printable ASCII format so they can be embedded as MIME attachments in mail to other sites.

1 Description

This program generates cryptographic data files used by the NTPv4 authentication and identity schemes. It can generate message digest keys used in symmetric key cryptography and, if the OpenSSL software library has been installed, it can generate host keys, sign keys, certificates, and identity keys and parameters used by the Autokey public key cryptography. The message digest keys file is generated in a format compatible with NTPv3. All other files are in PEM-encoded printable ASCII format so they can be embedded as MIME attachments in mail to other sites.

When used to generate message digest keys, the program produces a file containing ten pseudo-random printable ASCII strings suitable for the MD5 message digest algorithm included in the distribution. If the OpenSSL library is installed, it produces an additional ten hex-encoded random bit strings suitable for the SHA1 and other message digest algorithms. The message digest keys file must be distributed and stored using secure means beyond the scope of NTP itself. Besides the keys used for ordinary NTP associations, additional keys can be defined as passwords for the ntpq and ntpdc utility programs.

The remaining generated files are compatible with other OpenSSL applications and other Public Key Infrastructure (PKI) resources. Certificates generated by this program are compatible with extant industry practice, although some users might find the interpretation of X509v3 extension fields somewhat liberal. However, the identity keys are probably not compatible with anything other than Autokey.

Some files used by this program are encrypted using a private password. The -p option specifies the password for local encrypted files and the -q option the password for encrypted files sent to remote sites. If no password is specified, the host name returned by the Unix gethostname() function, normally the DNS name of the host, is used.

The pw option of the crypto configuration command specifies the read password for previously encrypted local files. This must match the local password used by this program. If not specified, the host name is used. Thus, if files are generated by this program without password, they can be read back by ntpd without password, but only on the same host.

Normally, encrypted files for each host are generated by that host and used only by that host, although exceptions exist as noted later on this page. The symmetric keys file, normally called ntp.keys, is usually installed in /etc. Other files and links are usually installed in /usr/local/etc, which is normally in a shared filesystem in NFS-mounted networks and cannot be changed by shared clients. The location of the keys directory can be changed by the keysdir configuration command in such cases. Normally, this is in /etc.

This program directs commentary and error messages to the standard error stream stderr and remote files to the standard output stream stdout where they can be piped to other applications or redirected to files. The names used for generated files and links all begin with the string ntpkey and include the file type, generating host and filestamp, as described in the Cryptographic Data Files section below.

1.1 Running the Program

To test and gain experience with Autokey concepts, log in as root and change to the keys directory, usually /usr/local/etc. When run for the first time, or if all files with names beginning ntpkey] have been removed, use the ntp-keygen command without arguments to generate a default RSA host key and matching RSA-MD5 certificate with expiration date one year hence. If run again without options, the program uses the existing keys and parameters and generates only a new certificate with new expiration date one year hence.

Run the command on as many hosts as necessary. Designate one of them as the trusted host (TH) using ntp-keygen with the -T option and configure it to synchronize from reliable Internet servers. Then configure the other hosts to synchronize to the TH directly or indirectly. A certificate trail is created when Autokey asks the immediately ascendant host towards the TH to sign its certificate, which is then provided to the immediately descendant host on request. All group hosts should have acyclic certificate trails ending on the TH.

The host key is used to encrypt the cookie when required and so must be RSA type. By default, the host key is also the sign key used to encrypt signatures. A different sign key can be assigned using the -S option and this can be either RSA or DSA type. By default, the signature message digest type is MD5, but any combination of sign key type and message digest type supported by the OpenSSL library can be specified using the -c option.

The rules say cryptographic media should be generated with proventic filestamps, which means the host should already be synchronized before this program is run. This of course creates a chicken-and-egg problem when the host is started for the first time. Accordingly, the host time should be set by some other means, such as eyeball-and-wristwatch, at least so that the certificate lifetime is within the current year. After that and when the host is synchronized to a proventic source, the certificate should be re-generated.

Additional information on trusted groups and identity schemes is on the Autokey Public-Key Authentication page.

1.2 Invoking ntp-keygen

This program generates cryptographic data files used by the NTPv4 authentication and identification schemes. It can generate message digest keys used in symmetric key cryptography and, if the OpenSSL software library has been installed, it can generate host keys, signing keys, certificates, and identity keys and parameters used in Autokey public key cryptography. These files are used for cookie encryption, digital signature, and challenge/response identification algorithms compatible with the Internet standard security infrastructure.

The message digest symmetric keys file is generated in a format compatible with NTPv3. All other files are in PEM-encoded printable ASCII format, so they can be embedded as MIME attachments in email to other sites and certificate authorities. By default, files are not encrypted.

When used to generate message digest symmetric keys, the program produces a file containing ten pseudo-random printable ASCII strings suitable for the MD5 message digest algorithm included in the distribution. If the OpenSSL library is installed, it produces an additional ten hex-encoded random bit strings suitable for SHA1, AES-128-CMAC, and other message digest algorithms. The message digest symmetric keys file must be distributed and stored using secure means beyond the scope of NTP itself. Besides the keys used for ordinary NTP associations, additional keys can be defined as passwords for the ntpq(1ntpqmdoc) and ntpdc(1ntpdcmdoc) utility programs.

Some files used by this program are encrypted using a private password. The -p option specifies the read password for local encrypted files and the -q option the write password for encrypted files sent to remote sites. If no password is specified, the host name returned by the Unix hostname(1) command, normally the DNS name of the host, is used as the the default read password, for convenience. The ntp-keygen program prompts for the password if it reads an encrypted file and the password is missing or incorrect. If an encrypted file is read successfully and no write password is specified, the read password is used as the write password by default.

The pw option of the crypto ntpd(1ntpdmdoc) configuration command specifies the read password for previously encrypted local files. This must match the local read password used by this program. If not specified, the host name is used. Thus, if files are generated by this program without an explicit password, they can be read back by ntpd(1ntpdmdoc) without specifying an explicit password but only on the same host. If the write password used for encryption is specified as the host name, these files can be read by that host with no explicit password.

Normally, encrypted files for each host are generated by that host and used only by that host, although exceptions exist as noted later on this page. The symmetric keys file, normally called ntp.keys, is usually installed in /etc. Other files and links are usually installed in /usr/local/etc, which is normally in a shared filesystem in NFS-mounted networks and cannot be changed by shared clients. In these cases, NFS clients can specify the files in another directory such as /etc using the keysdir ntpd(1ntpdmdoc) configuration file command.

This program directs commentary and error messages to the standard error stream stderr and remote files to the standard output stream stdout where they can be piped to other applications or redirected to files. The names used for generated files and links all begin with the string ntpkey* and include the file type, generating host and filestamp, as described in the Cryptographic Data Files section below.

1.2.1 Running the Program

The safest way to run the ntp-keygen program is logged in directly as root. The recommended procedure is change to the keys directory, usually /usr/local/etc, then run the program.

To test and gain experience with Autokey concepts, log in as root and change to the keys directory, usually /usr/local/etc. When run for the first time, or if all files with names beginning with ntpkey* have been removed, use the ntp-keygen command without arguments to generate a default RSA host key and matching RSA-MD5 certificate file with expiration date one year hence, which is all that is necessary in many cases. The program also generates soft links from the generic names to the respective files. If run again without options, the program uses the existing keys and parameters and generates a new certificate file with new expiration date one year hence, and soft link.

The host key is used to encrypt the cookie when required and so must be RSA type. By default, the host key is also the sign key used to encrypt signatures. When necessary, a different sign key can be specified and this can be either RSA or DSA type. By default, the message digest type is MD5, but any combination of sign key type and message digest type supported by the OpenSSL library can be specified, including those using the AES128CMAC, MD2, MD5, MDC2, SHA, SHA1 and RIPE160 message digest algorithms. However, the scheme specified in the certificate must be compatible with the sign key. Certificates using any digest algorithm are compatible with RSA sign keys; however, only SHA and SHA1 certificates are compatible with DSA sign keys.

Private/public key files and certificates are compatible with other OpenSSL applications and very likely other libraries as well. Certificates or certificate requests derived from them should be compatible with extant industry practice, although some users might find the interpretation of X509v3 extension fields somewhat liberal. However, the identification parameter files, although encoded as the other files, are probably not compatible with anything other than Autokey.

Running the program as other than root and using the Unix su(1) command to assume root may not work properly, since by default the OpenSSL library looks for the random seed file .rnd in the user home directory. However, there should be only one .rnd, most conveniently in the root directory, so it is convenient to define the .Ev RANDFILE environment variable used by the OpenSSL library as the path to .rnd.

Installing the keys as root might not work in NFS-mounted shared file systems, as NFS clients may not be able to write to the shared keys directory, even as root. In this case, NFS clients can specify the files in another directory such as /etc using the keysdir ntpd(1ntpdmdoc) configuration file command. There is no need for one client to read the keys and certificates of other clients or servers, as these data are obtained automatically by the Autokey protocol.

Ordinarily, cryptographic files are generated by the host that uses them, but it is possible for a trusted agent (TA) to generate these files for other hosts; however, in such cases files should always be encrypted. The subject name and trusted name default to the hostname of the host generating the files, but can be changed by command line options. It is convenient to designate the owner name and trusted name as the subject and issuer fields, respectively, of the certificate. The owner name is also used for the host and sign key files, while the trusted name is used for the identity files.

All files are installed by default in the keys directory /usr/local/etc, which is normally in a shared filesystem in NFS-mounted networks. The actual location of the keys directory and each file can be overridden by configuration commands, but this is not recommended. Normally, the files for each host are generated by that host and used only by that host, although exceptions exist as noted later on this page.

Normally, files containing private values, including the host key, sign key and identification parameters, are permitted root read/write-only; while others containing public values are permitted world readable. Alternatively, files containing private values can be encrypted and these files permitted world readable, which simplifies maintenance in shared file systems. Since uniqueness is insured by the hostname and filestamp file name extensions, the files for an NTP server and dependent clients can all be installed in the same shared directory.

The recommended practice is to keep the file name extensions when installing a file and to install a soft link from the generic names specified elsewhere on this page to the generated files. This allows new file generations to be activated simply by changing the link. If a link is present, ntpd(1ntpdmdoc) follows it to the file name to extract the filestamp. If a link is not present, ntpd(1ntpdmdoc) extracts the filestamp from the file itself. This allows clients to verify that the file and generation times are always current. The ntp-keygen program uses the same filestamp extension for all files generated at one time, so each generation is distinct and can be readily recognized in monitoring data.

The host key is used to encrypt the cookie when required and so must be RSA type. By default, the host key is also the sign key used to encrypt signatures. A different sign key can be assigned using the -S option and this can be either RSA or DSA type. By default, the signature message digest type is MD5, but any combination of sign key type and message digest type supported by the OpenSSL library can be specified using the -c option.

Additional information on trusted groups and identity schemes is on the “Autokey Public-Key Authentication” page.

File names begin with the prefix ntpkey_ and end with the suffix _hostname. filestamp, where hostname is the owner name, usually the string returned by the Unix hostname(1) command, and filestamp is the NTP seconds when the file was generated, in decimal digits. This both guarantees uniqueness and simplifies maintenance procedures, since all files can be quickly removed by a rm ntpkey* command or all files generated at a specific time can be removed by a rm *filestamp command. To further reduce the risk of misconfiguration, the first two lines of a file contain the file name and generation date and time as comments.

1.2.1.1 Trusted Hosts and Groups

Each cryptographic configuration involves selection of a signature scheme and identification scheme, called a cryptotype, as explained in the ‘Authentication Options’ section of ntp.conf(5). The default cryptotype uses RSA encryption, MD5 message digest and TC identification. First, configure a NTP subnet including one or more low-stratum trusted hosts from which all other hosts derive synchronization directly or indirectly. Trusted hosts have trusted certificates; all other hosts have nontrusted certificates. These hosts will automatically and dynamically build authoritative certificate trails to one or more trusted hosts. A trusted group is the set of all hosts that have, directly or indirectly, a certificate trail ending at a trusted host. The trail is defined by static configuration file entries or dynamic means described on the ‘Automatic NTP Configuration Options’ section of ntp.conf(5).

On each trusted host as root, change to the keys directory. To insure a fresh fileset, remove all ntpkey files. Then run ntp-keygen -T to generate keys and a trusted certificate. On all other hosts do the same, but leave off the -T flag to generate keys and nontrusted certificates. When complete, start the NTP daemons beginning at the lowest stratum and working up the tree. It may take some time for Autokey to instantiate the certificate trails throughout the subnet, but setting up the environment is completely automatic.

If it is necessary to use a different sign key or different digest/signature scheme than the default, run ntp-keygen with the -S type option, where type is either RSA or DSA. The most frequent need to do this is when a DSA-signed certificate is used. If it is necessary to use a different certificate scheme than the default, run ntp-keygen with the -c scheme option and selected scheme as needed. If ntp-keygen is run again without these options, it generates a new certificate using the same scheme and sign key, and soft link.

After setting up the environment it is advisable to update certificates from time to time, if only to extend the validity interval. Simply run ntp-keygen with the same flags as before to generate new certificates using existing keys, and soft links. However, if the host or sign key is changed, ntpd(1ntpdmdoc) should be restarted. When ntpd(1ntpdmdoc) is restarted, it loads any new files and restarts the protocol. Other dependent hosts will continue as usual until signatures are refreshed, at which time the protocol is restarted.

1.2.1.2 Identity Schemes

As mentioned on the Autonomous Authentication page, the default TC identity scheme is vulnerable to a middleman attack. However, there are more secure identity schemes available, including PC, IFF, GQ and MV schemes described below. These schemes are based on a TA, one or more trusted hosts and some number of nontrusted hosts. Trusted hosts prove identity using values provided by the TA, while the remaining hosts prove identity using values provided by a trusted host and certificate trails that end on that host. The name of a trusted host is also the name of its sugroup and also the subject and issuer name on its trusted certificate. The TA is not necessarily a trusted host in this sense, but often is.

In some schemes there are separate keys for servers and clients. A server can also be a client of another server, but a client can never be a server for another client. In general, trusted hosts and nontrusted hosts that operate as both server and client have parameter files that contain both server and client keys. Hosts that operate only as clients have key files that contain only client keys.

The PC scheme supports only one trusted host in the group. On trusted host alice run ntp-keygen -P -p password to generate the host key file ntpkey_ RSA key_alice. filestamp and trusted private certificate file ntpkey_ RSA-MD5 _ cert_alice. filestamp, and soft links. Copy both files to all group hosts; they replace the files which would be generated in other schemes. On each host bob install a soft link from the generic name ntpkey_host_bob to the host key file and soft link ntpkey_cert_bob to the private certificate file. Note the generic links are on bob, but point to files generated by trusted host alice. In this scheme it is not possible to refresh either the keys or certificates without copying them to all other hosts in the group, and recreating the soft links.

For the IFF scheme proceed as in the TC scheme to generate keys and certificates for all group hosts, then for every trusted host in the group, generate the IFF parameter file. On trusted host alice run ntp-keygen -T -I -p password to produce her parameter file ntpkey_IFFpar_alice.filestamp, which includes both server and client keys. Copy this file to all group hosts that operate as both servers and clients and install a soft link from the generic ntpkey_iff_alice to this file. If there are no hosts restricted to operate only as clients, there is nothing further to do. As the IFF scheme is independent of keys and certificates, these files can be refreshed as needed.

If a rogue client has the parameter file, it could masquerade as a legitimate server and present a middleman threat. To eliminate this threat, the client keys can be extracted from the parameter file and distributed to all restricted clients. After generating the parameter file, on alice run ntp-keygen -e and pipe the output to a file or email program. Copy or email this file to all restricted clients. On these clients install a soft link from the generic ntpkey_iff_alice to this file. To further protect the integrity of the keys, each file can be encrypted with a secret password.

For the GQ scheme proceed as in the TC scheme to generate keys and certificates for all group hosts, then for every trusted host in the group, generate the IFF parameter file. On trusted host alice run ntp-keygen -T -G -p password to produce her parameter file ntpkey_GQpar_alice.filestamp, which includes both server and client keys. Copy this file to all group hosts and install a soft link from the generic ntpkey_gq_alice to this file. In addition, on each host bob install a soft link from generic ntpkey_gq_bob to this file. As the GQ scheme updates the GQ parameters file and certificate at the same time, keys and certificates can be regenerated as needed.

For the MV scheme, proceed as in the TC scheme to generate keys and certificates for all group hosts. For illustration assume trish is the TA, alice one of several trusted hosts and bob one of her clients. On TA trish run ntp-keygen -V n -p password, where n is the number of revokable keys (typically 5) to produce the parameter file ntpkeys_MVpar_trish.filestamp and client key files ntpkeys_MVkeyd _ trish. filestamp where d is the key number (0 < d < n). Copy the parameter file to alice and install a soft link from the generic ntpkey_mv_alice to this file. Copy one of the client key files to alice for later distribution to her clients. It does not matter which client key file goes to alice, since they all work the same way. Alice copies the client key file to all of her clients. On client bob install a soft link from generic ntpkey_mvkey_bob to the client key file. As the MV scheme is independent of keys and certificates, these files can be refreshed as needed.

1.2.1.3 Command Line Options

1.2.1.4 Random Seed File

All cryptographically sound key generation schemes must have means to randomize the entropy seed used to initialize the internal pseudo-random number generator used by the library routines. The OpenSSL library uses a designated random seed file for this purpose. The file must be available when starting the NTP daemon and ntp-keygen program. If a site supports OpenSSL or its companion OpenSSH, it is very likely that means to do this are already available.

It is important to understand that entropy must be evolved for each generation, for otherwise the random number sequence would be predictable. Various means dependent on external events, such as keystroke intervals, can be used to do this and some systems have built-in entropy sources. Suitable means are described in the OpenSSL software documentation, but are outside the scope of this page.

The entropy seed used by the OpenSSL library is contained in a file, usually called .rnd, which must be available when starting the NTP daemon or the ntp-keygen program. The NTP daemon will first look for the file using the path specified by the randfile subcommand of the crypto configuration command. If not specified in this way, or when starting the ntp-keygen program, the OpenSSL library will look for the file using the path specified by the .Ev RANDFILE environment variable in the user home directory, whether root or some other user. If the .Ev RANDFILE environment variable is not present, the library will look for the .rnd file in the user home directory. Since both the ntp-keygen program and ntpd(1ntpdmdoc) daemon must run as root, the logical place to put this file is in /.rnd or /root/.rnd. If the file is not available or cannot be written, the daemon exits with a message to the system log and the program exits with a suitable error message.

1.2.1.5 Cryptographic Data Files

All file formats begin with two nonencrypted lines. The first line contains the file name, including the generated host name and filestamp, in the format ntpkey_key _ name. filestamp, where key is the key or parameter type, name is the host or group name and filestamp is the filestamp (NTP seconds) when the file was created. By convention, key names in generated file names include both upper and lower case characters, while key names in generated link names include only lower case characters. The filestamp is not used in generated link names. The second line contains the datestamp in conventional Unix date format. Lines beginning with ‘#’ are considered comments and ignored by the ntp-keygen program and ntpd(1ntpdmdoc) daemon.

The remainder of the file contains cryptographic data, encoded first using ASN.1 rules, then encrypted if necessary, and finally written in PEM-encoded printable ASCII text, preceded and followed by MIME content identifier lines.

The format of the symmetric keys file, ordinarily named ntp.keys, is somewhat different than the other files in the interest of backward compatibility. Ordinarily, the file is generated by this program, but it can be constructed and edited using an ordinary text editor.

Figure 1. Typical Symmetric Key File

Figure 1 shows a typical symmetric keys file used by the reference implementation. Following the header the keys are entered one per line in the format

keyno type key

where keyno is a positive integer in the range 1-65535; type is the key type for the message digest algorithm, which in the absence of the OpenSSL library must be MD5 to designate the MD5 message digest algorithm; if the OpenSSL library is installed, the key type can be any message digest algorithm supported by that library; however, if compatibility with FIPS 140-2 is required, the key type must be either SHA or SHA1; key is the key itself, which is a printable ASCII string 20 characters or less in length: each character is chosen from the 93 printable characters in the range 0x21 through 0x7e ( ‘’! through ‘~’ ) excluding space and the ‘#’ character, and terminated by whitespace or a ‘#’ character. An OpenSSL key consists of a hex-encoded ASCII string of 40 characters, which is truncated as necessary.

Note that the keys used by the ntpq(1ntpqmdoc) and ntpdc(1ntpdcmdoc) programs are checked against passwords requested by the programs and entered by hand, so it is generally appropriate to specify these keys in human readable ASCII format.

The ntp-keygen program generates a symmetric keys file ntpkey_MD5key_hostname. filestamp. Since the file contains private shared keys, it should be visible only to root and distributed by secure means to other subnet hosts. The NTP daemon loads the file ntp.keys, so ntp-keygen installs a soft link from this name to the generated file. Subsequently, similar soft links must be installed by manual or automated means on the other subnet hosts. While this file is not used with the Autokey Version 2 protocol, it is needed to authenticate some remote configuration commands used by the ntpq(1ntpqmdoc) and ntpdc(1ntpdcmdoc) utilities.

This section was generated by AutoGen, using the agtexi-cmd template and the option descriptions for the ntp-keygen program. This software is released under the NTP license, <http://ntp.org/license>.

1.2.2 ntp-keygen help/usage (--help)

The text printed is the same whether selected with the help option (--help) or the more-help option (--more-help). more-help will print the usage text by passing it through a pager program. more-help is disabled on platforms without a working fork(2) function. The PAGER environment variable is used to select the program, defaulting to more. Both will exit with a status code of 0.

ntp-keygen (ntp) - Create a NTP host key - Ver. 4.2.8p18
Usage:  ntp-keygen [ -<flag> [<val>] | --<name>[{=| }<val>] ]...
  Flg Arg Option-Name    Description
   -b Num imbits         identity modulus bits
                                - it must be in the range:
                                  256 to 2048
   -c Str certificate    certificate scheme
   -C Str cipher         privatekey cipher
   -d no  debug-level    Increase debug verbosity level
                                - may appear multiple times
   -D Num set-debug-level Set the debug verbosity level
                                - may appear multiple times
   -e no  id-key         Write IFF or GQ identity keys
   -G no  gq-params      Generate GQ parameters and keys
   -H no  host-key       generate RSA host key
   -I no  iffkey         generate IFF parameters
   -i Str ident          set Autokey group name
   -l Num lifetime       set certificate lifetime
   -m Num modulus        prime modulus
                                - it must be in the range:
                                  256 to 2048
   -M no  md5key         generate symmetric keys
   -P no  pvt-cert       generate PC private certificate
   -p Str password       local private password
   -q Str export-passwd  export IFF or GQ group keys with password
   -s Str subject-name   set host and optionally group name
   -S Str sign-key       generate sign key (RSA or DSA)
   -T no  trusted-cert   trusted certificate (TC scheme)
   -V Num mv-params      generate <num> MV parameters
   -v Num mv-keys        update <num> MV keys
      opt version        output version information and exit
   -? no  help           display extended usage information and exit
   -! no  more-help      extended usage information passed thru pager
   -> opt save-opts      save the option state to a config file
   -< Str load-opts      load options from a config file
                                - disabled as '--no-load-opts'
                                - may appear multiple times

Options are specified by doubled hyphens and their name or by a single
hyphen and the flag character.


The following option preset mechanisms are supported:
 - reading file $HOME/.ntprc
 - reading file ./.ntprc
 - examining environment variables named NTP_KEYGEN_*

Please send bug reports to:  <https://bugs.ntp.org, bugs@ntp.org>

1.2.3 imbits option (-b)

This is the “identity modulus bits” option. This option takes a number argument imbits.

1.2.4 certificate option (-c)

This is the “certificate scheme” option. This option takes a string argument scheme.

scheme is one of RSA-MD2, RSA-MD5, RSA-MDC2, RSA-SHA, RSA-SHA1, RSA-RIPEMD160, DSA-SHA, or DSA-SHA1.

Select the certificate signature encryption/message digest scheme. Note that RSA schemes must be used with a RSA sign key and DSA schemes must be used with a DSA sign key. The default without this option is RSA-MD5.

1.2.5 cipher option (-C)

This is the “privatekey cipher” option. This option takes a string argument cipher.

Select the cipher which is used to encrypt the files containing private keys. The default is three-key triple DES in CBC mode, equivalent to "-C des-ede3-cbc". The openssl tool lists ciphers available in "openssl -h" output.

1.2.6 id-key option (-e)

Write the public parameters from the IFF or GQ client keys to the standard output. This is intended for automatic key distribution by email.

1.2.7 gq-params option (-G)

Generate parameters and keys for the GQ identification scheme, obsoleting any that may exist.

1.2.8 host-key option (-H)

1.2.9 iffkey option (-I)

Generate parameters for the IFF identification scheme, obsoleting any that may exist.

1.2.10 ident option (-i)

This is the “set autokey group name” option. This option takes a string argument group.

Set the optional Autokey group name to name. This is used in the file name of IFF, GQ, and MV client parameters files. In that role, the default is the host name if this option is not provided. The group name, if specified using -i/--ident or using -s/--subject-name following an ’@’ character, is also a part of the self-signed host certificate subject and issuer names in the form host@group and should match the ’crypto ident’ or ’server ident’ configuration in the ntpd configuration file.

1.2.11 lifetime option (-l)

This is the “set certificate lifetime” option. This option takes a number argument lifetime.

1.2.12 modulus option (-m)

This is the “prime modulus” option. This option takes a number argument modulus.

1.2.13 md5key option (-M)

This is the “generate symmetric keys” option. Generate symmetric keys, obsoleting any that may exist.

1.2.14 pvt-cert option (-P)

Generate a private certificate. By default, the program generates public certificates.

1.2.15 password option (-p)

This is the “local private password” option. This option takes a string argument passwd.

Local files containing private data are encrypted with the DES-CBC algorithm and the specified password. The same password must be specified to the local ntpd via the "crypto pw password" configuration command. The default password is the local hostname.

1.2.16 export-passwd option (-q)

This is the “export iff or gq group keys with password” option. This option takes a string argument passwd.

Export IFF or GQ identity group keys to the standard output, encrypted with the DES-CBC algorithm and the specified password. The same password must be specified to the remote ntpd via the "crypto pw password" configuration command. See also the option –id-key (-e) for unencrypted exports.

1.2.17 subject-name option (-s)

This is the “set host and optionally group name” option. This option takes a string argument host@group.

Set the Autokey host name, and optionally, group name specified following an ’@’ character. The host name is used in the file name of generated host and signing certificates, without the group name. The host name, and if provided, group name are used in host@group form for the host certificate subject and issuer fields. Specifying ’-s @group’ is allowed, and results in leaving the host name unchanged while appending @group to the subject and issuer fields, as with -i group. The group name, or if not provided, the host name are also used in the file names of IFF, GQ, and MV client parameter files.

1.2.18 sign-key option (-S)

This is the “generate sign key (rsa or dsa)” option. This option takes a string argument sign.

Generate a new sign key of the designated type, obsoleting any that may exist. By default, the program uses the host key as the sign key.

1.2.19 trusted-cert option (-T)

Generate a trusted certificate. By default, the program generates a non-trusted certificate.

1.2.20 mv-params option (-V)

This is the “generate <num> mv parameters” option. This option takes a number argument num.

Generate parameters and keys for the Mu-Varadharajan (MV) identification scheme.

1.2.21 mv-keys option (-v)

This is the “update <num> mv keys” option. This option takes a number argument num.

1.2.22 presetting/configuring ntp-keygen

Any option that is not marked as not presettable may be preset by loading values from configuration ("rc" or "ini") files, and values from environment variables named NTP-KEYGEN and NTP-KEYGEN_<OPTION_NAME>. <OPTION_NAME> must be one of the options listed above in upper case and segmented with underscores. The NTP-KEYGEN variable will be tokenized and parsed like the command line. The remaining variables are tested for existence and their values are treated like option arguments.

The environment variables HOME, and PWD are expanded and replaced when ntp-keygen runs. For any of these that are plain files, they are simply processed. For any that are directories, then a file named .ntprc is searched for within that directory and processed.

Configuration files may be in a wide variety of formats. The basic format is an option name followed by a value (argument) on the same line. Values may be separated from the option name with a colon, equal sign or simply white space. Values may be continued across multiple lines by escaping the newline with a backslash.

Multiple programs may also share the same initialization file. Common options are collected at the top, followed by program specific segments. The segments are separated by lines like:

<?program ntp-keygen>

Compound values and carefully constructed string values may also be specified using XML syntax:

<option-name>
   <sub-opt>...&lt;...&gt;...</sub-opt>
</option-name>

AutoOpts does not track suboptions. You simply note that it is a hierarchicly valued option. AutoOpts does provide a means for searching the associated name/value pair list (see: optionFindValue).

version (-)

Print the program version to standard out, optionally with licensing information, then exit 0. The optional argument specifies how much licensing detail to provide. The default is to print just the version. The licensing information may be selected with an option argument. Only the first letter of the argument is examined:

1.2.23 ntp-keygen exit status

1.2.24 ntp-keygen Usage

1.2.25 ntp-keygen Notes

1.2.26 ntp-keygen Bugs

1.3 Random Seed File

All cryptographically sound key generation schemes must have means to randomize the entropy seed used to initialize the internal pseudo-random number generator used by the OpenSSL library routines. If a site supports ssh, it is very likely that means to do this are already available. The entropy seed used by the OpenSSL library is contained in a file, usually called .rnd, which must be available when starting the ntp-keygen program or ntpd daemon.

The OpenSSL library looks for the file using the path specified by the RANDFILE environment variable in the user home directory, whether root or some other user. If the RANDFILE environment variable is not present, the library looks for the .rnd file in the user home directory. Since both the ntp-keygen program and ntpd daemon must run as root, the logical place to put this file is in /.rnd or /root/.rnd. If the file is not available or cannot be written, the program exits with a message to the system log.

1.4 Cryptographic Data Files

File and link names are in the form ntpkey_key_name.fstamp, where key is the key or parameter type, name is the host or group name and fstamp is the filestamp (NTP seconds) when the file was created). By convention, key names in generated file names include both upper and lower case characters, while key names in generated link names include only lower case characters. The filestamp is not used in generated link names.

The key name is a string defining the cryptographic key type. Key types include public/private keys host and sign, certificate cert and several challenge/response key types. By convention, client files used for challenges have a par subtype, as in the IFF challenge IFFpar, while server files for responses have a key subtype, as in the GQ response GQkey.

All files begin with two nonencrypted lines. The first line contains the file name in the format ntpkey_key_host.fstamp. The second line contains the datestamp in conventional Unix date format. Lines beginning with # are ignored.

The remainder of the file contains cryptographic data encoded first using ASN.1 rules, then encrypted using the DES-CBC algorithm with given password and finally written in PEM-encoded printable ASCII text preceded and followed by MIME content identifier lines.

# ntpkey_MD5key_hms.local.3564038757
# Sun Dec  9 02:45:57 2012

 1 MD5 "]!ghT%O;3)WJ,/Nc:>I  # MD5 key
 2 MD5 lu+H^tF46BKR-6~pV_5  # MD5 key
 3 MD5 :lnoVsE%Yz*avh%EtNC  # MD5 key
 4 MD5 |fdZrf0sF~;w-i^V  # MD5 key
 5 MD5 IyAG>O"y"LmCRS!*bHC  # MD5 key
 6 MD5 ">e\A>hT/661ri52,,H  # MD5 key
 7 MD5 c9x=M'CfLxax9v)PV-si  # MD5 key
 8 MD5 E|=jvFVov?Bn|Ev=&aK\  # MD5 key
 9 MD5 T!c4UT&`(m$+m+B6,`Q0  # MD5 key
10 MD5 JVF/1=)=IFbHbJQz..Cd  # MD5 key
11 SHA1 6dea311109529e436c2b4fccae9bc753c16d1b48  # SHA1 key
12 SHA1 7076f373d86c4848c59ff8046e49cb7d614ec394  # SHA1 key
13 SHA1 5f48b1b60591eb01b7cf1d33b7774f08d20262d3  # SHA1 key
14 SHA1 eed5ab9d9497319ec60cf3781d52607e76720178  # SHA1 key
15 SHA1 f283562611a04c964da8126296f5f8e58c3f85de  # SHA1 key
16 SHA1 1930da171297dd63549af50b29449de17dcf341f  # SHA1 key
17 SHA1 fee892110358cd4382322b889869e750db8e8a8f  # SHA1 key
18 SHA1 b5520c9fadd7ad3fd8bfa061c8821b65d029bb37  # SHA1 key
19 SHA1 8c74fb440ec80f453ec6aaa62b9baed0ab723b92  # SHA1 key
20 SHA1 6bc05f734306a189326000970c19b3910f403795  # SHA1 key

Figure 1 shows a typical symmetric keys file used by the reference implementation. Each line of the file contains three fields, first an integer between 1 and 65535, inclusive, representing the key identifier used in the server and peer configuration commands. Next is the key type for the message digest algorithm, which in the absence of the OpenSSL library must be MD5 to designate the MD5 message digest algorithm. If the OpenSSL library is installed, the key type can be any message digest algorithm supported by that library. However, if compatibility with FIPS 140-2 is required, the key type must be either SHA or SHA1. The key type can be changed using an ASCII text editor.

An MD5 key consists of a printable ASCII string less than or equal to 16 characters and terminated by whitespace or a # character. An OpenSSL key consists of a hex-encoded ASCII string of 40 characters, which is truncated as necessary.

Note that the keys used by the ntpq and ntpdc programs are checked against passwords requested by the programs and entered by hand, so it is generally appropriate to specify these keys in human readable ASCII format.

The ntp-keygen program generates a MD5 symmetric keys file ntpkey_MD5key_hostname.filestamp. Since the file contains private shared keys, it should be visible only to root and distributed by secure means to other subnet hosts. The NTP daemon loads the file ntp.keys, so ntp-keygen installs a soft link from this name to the generated file. Subsequently, similar soft links must be installed by manual or automated means on the other subnet hosts. While this file is not used with the Autokey Version 2 protocol, it is needed to authenticate some remote configuration commands used by the ntpq and ntpdc utilities.

• Description
• ntp-keygen Invocation		Invoking ntp-keygen
• Running the Program
• Random Seed File
• Cryptographic Data Files

• Running the Program
• Invoking ntp-keygen
• Random Seed File
• Cryptographic Data Files

• ntp-keygen help/usage (`--help`)
• imbits option (-b)
• certificate option (-c)
• cipher option (-C)
• id-key option (-e)
• gq-params option (-G)
• host-key option (-H)
• iffkey option (-I)
• ident option (-i)
• lifetime option (-l)
• modulus option (-m)
• md5key option (-M)
• pvt-cert option (-P)
• password option (-p)
• export-passwd option (-q)
• subject-name option (-s)
• sign-key option (-S)
• trusted-cert option (-T)
• mv-params option (-V)
• mv-keys option (-v)
• presetting/configuring ntp-keygen
• ntp-keygen exit status
• ntp-keygen Usage
• ntp-keygen Notes
• ntp-keygen Bugs

Ntp-keygen User’s Manual

Short Table of Contents

NTP Key Generation Program User Manual

1 Description

1.1 Running the Program

1.2 Invoking ntp-keygen

1.2.1 Running the Program

1.2.1.1 Trusted Hosts and Groups

1.2.1.2 Identity Schemes

1.2.1.3 Command Line Options

1.2.1.4 Random Seed File

1.2.1.5 Cryptographic Data Files

1.2.2 ntp-keygen help/usage (`--help`)

1.2.3 imbits option (-b)

1.2.4 certificate option (-c)

1.2.5 cipher option (-C)

1.2.6 id-key option (-e)

1.2.7 gq-params option (-G)

1.2.8 host-key option (-H)

1.2.9 iffkey option (-I)

1.2.10 ident option (-i)

1.2.11 lifetime option (-l)

1.2.12 modulus option (-m)

1.2.13 md5key option (-M)

1.2.14 pvt-cert option (-P)

1.2.15 password option (-p)

1.2.16 export-passwd option (-q)

1.2.17 subject-name option (-s)

1.2.18 sign-key option (-S)

1.2.19 trusted-cert option (-T)

1.2.20 mv-params option (-V)

1.2.21 mv-keys option (-v)

1.2.22 presetting/configuring ntp-keygen

version (-)

1.2.23 ntp-keygen exit status

1.2.24 ntp-keygen Usage

1.2.25 ntp-keygen Notes

1.2.26 ntp-keygen Bugs

1.3 Random Seed File

1.4 Cryptographic Data Files

• ntp-keygen usage		ntp-keygen help/usage (`--help`)
• ntp-keygen imbits		imbits option (-b)
• ntp-keygen certificate		certificate option (-c)
• ntp-keygen cipher		cipher option (-C)
• ntp-keygen id-key		id-key option (-e)
• ntp-keygen gq-params		gq-params option (-G)
• ntp-keygen host-key		host-key option (-H)
• ntp-keygen iffkey		iffkey option (-I)
• ntp-keygen ident		ident option (-i)
• ntp-keygen lifetime		lifetime option (-l)
• ntp-keygen modulus		modulus option (-m)
• ntp-keygen md5key		md5key option (-M)
• ntp-keygen pvt-cert		pvt-cert option (-P)
• ntp-keygen password		password option (-p)
• ntp-keygen export-passwd		export-passwd option (-q)
• ntp-keygen subject-name		subject-name option (-s)
• ntp-keygen sign-key		sign-key option (-S)
• ntp-keygen trusted-cert		trusted-cert option (-T)
• ntp-keygen mv-params		mv-params option (-V)
• ntp-keygen mv-keys		mv-keys option (-v)
• ntp-keygen config		presetting/configuring ntp-keygen
• ntp-keygen exit status		exit status
• ntp-keygen Usage		Usage
• ntp-keygen Notes		Notes
• ntp-keygen Bugs		Bugs

Ntp-keygen User’s Manual

Short Table of Contents

NTP Key Generation Program User Manual

1 Description

1.1 Running the Program

1.2 Invoking ntp-keygen

1.2.1 Running the Program

1.2.1.1 Trusted Hosts and Groups

1.2.1.2 Identity Schemes

1.2.1.3 Command Line Options

1.2.1.4 Random Seed File

1.2.1.5 Cryptographic Data Files

1.2.2 ntp-keygen help/usage (--help)

1.2.3 imbits option (-b)

1.2.4 certificate option (-c)

1.2.5 cipher option (-C)

1.2.6 id-key option (-e)

1.2.7 gq-params option (-G)

1.2.8 host-key option (-H)

1.2.9 iffkey option (-I)

1.2.10 ident option (-i)

1.2.11 lifetime option (-l)

1.2.12 modulus option (-m)

1.2.13 md5key option (-M)

1.2.14 pvt-cert option (-P)

1.2.15 password option (-p)

1.2.16 export-passwd option (-q)

1.2.17 subject-name option (-s)

1.2.18 sign-key option (-S)

1.2.19 trusted-cert option (-T)

1.2.20 mv-params option (-V)

1.2.21 mv-keys option (-v)

1.2.22 presetting/configuring ntp-keygen

version (-)

1.2.23 ntp-keygen exit status

1.2.24 ntp-keygen Usage

1.2.25 ntp-keygen Notes

1.2.26 ntp-keygen Bugs

1.3 Random Seed File

1.4 Cryptographic Data Files

1.2.2 ntp-keygen help/usage (`--help`)